EQUIPMENT DIRECTORY
Industrial Ovens & Custom Systems.
Industrial ovens, curing equipment and custom heating lines arranged around the load, thermal cycle and installation.
Equipment and technical references
8 entries
Industrial Oven for Assessed Hazardous Duties
A chamber oven range described in the brochure with protected electrical components, temperature control and over-temperature alarms. Suitability is project-specific.
Listed model: RH-EX-1; Rated power (kW): 4; Listed maximum temperature (°C): 300; Work-zone dimensions (mm): 500 × 600 × 750
Transformer Drying and Curing Oven
A programmable forced-air oven for transformer manufacturing, with handling and airflow arranged around the load.
Listed model: RH-CT-1; Supply voltage (V): 380; Heating power (kW): 8; Chamber H × W × D (mm): 800 × 800 × 1000
Drum Heating Oven
A temperature-controlled hot-air enclosure for heating drum-contained materials, available in several drum-loading arrangements.
Listed model: RH-T-1; 208 L drums: 1; Internal W × D × H (cm): 90 × 90 × 150; Overall W × D × H (cm): 126 × 114 × 210
Large Trolley-Loaded Electric Oven
A forced-air electric oven with trolley loading for large industrial workpieces.
Model: NCL86-42; Rated temperature (°C): 500; Chamber dimensions (mm): 1200 × 1000 × 1000; Heating power (kW): 45
Electric Forced-Air Drying Oven
An electrically heated chamber oven range for workshop drying and temperature-controlled processing.
Model: NF101-0A; Listed working temperature (°C): 10–300; Chamber dimensions (mm): 250 × 350 × 350; Power (kW): 1.8
Trolley-Loaded Hot-Air Furnace
A trolley-fed forced-air furnace range with the brochure listing 300°C and 500°C configurations.
Model: NF85-4; Working temperature (°C): 300; Chamber dimensions (mm): 1200 × 1000 × 1000; Power (kW): 36
Curing Oven
An electric chamber oven range for workpiece curing, with several listed chamber sizes.
Model: NJ101-5; Rated power (kW): 9; Maximum working temperature (°C): 300; Work zone L × W × H (mm): 1000 × 800 × 1000
Custom Industrial Ovens and Heating Lines
Custom chamber, trolley, pit and conveyor arrangements are developed around the workpiece, thermal cycle and installation.
Directory counts refer to brochure entries, including equipment families and system configurations. They do not represent current stock. Parameters are brochure references; suitability and supply scope require a confirmed technical proposal. Read the source and specification notes ↗
LET’S BUILD SOMETHING BETTER
Equipment starts with your process.
Share your material, required output and process conditions to discuss a suitable configuration.