Material or workpiece
Composition, form, bulk density or dimensions; moisture, viscosity and any special media.
Ozone Equipment & Systems
FLUIVEX / OZONE EQUIPMENTRH-S-KSPECIFICATION REFERENCE
RH-S-K / FLUIVEX
FLUIVEX Water-Cooled Air-Fed Ozone Generator
An air-fed, water-cooled ozone-generator range with listed outputs from 20 to 200 g/h.
- Smaller air-fed configurations
- Water-cooled design
- Feed-gas and dew-point specification
Manufactured by Runhao Intelligent Equipment Nanjing Co., Ltd.
The brochure supplies specifications without a dedicated photograph for this entry.
01 / APPLICATION
What this equipment does
Smaller air-fed ozone applications. Feed-air dew point, gas demand and cooling conditions are part of the specification.
An air-fed, water-cooled ozone-generator range with listed outputs from 20 to 200 g/h.
02 / TECHNICAL DATA
Reference specifications
Source: company brochure, PDF page 28 right lower. Reviewed 5 November 2026.
- Cooling
- Water-cooled
On smaller screens, scroll the table sideways.
| Model | Ozone output (g/h) | Supply (V/Hz) | Overall dimensions (mm) |
|---|---|---|---|
| RH-S-K20 | 20 | 220 / 50 | 860 × 510 × 1220 |
| RH-S-K30 | 30 | 220 / 50 | 860 × 510 × 1220 |
| RH-S-K50 | 50 | 220 / 50 | 860 × 510 × 1220 |
| RH-S-K100 | 100 | 220 / 50 | 1060 × 680 × 1520 |
| RH-S-K150 | 150 | 220 / 50 | 1060 × 680 × 1520 |
| RH-S-K200 | 200 | 220 / 50 | 1060 × 680 × 1520 |
03 / PROJECT INPUTS
Define the application before choosing a size
Process and capacity
Required kg/batch or kg/h, acceptable temperature, processing time and quality endpoint.
Installation and validation
Available utilities, loading access, cleaning, controls and the agreed acceptance method.
Questions about this equipment
What is the Water-Cooled Air-Fed Ozone Generator used for?
Smaller air-fed ozone applications. Feed-air dew point, gas demand and cooling conditions are part of the specification.
Which specifications are available for the RH-S-K range?
The table on this page lists the brochure configurations and their units. The source is the company brochure, PDF page 28 right lower. Confirm the current model, utilities and acceptance conditions before ordering.
What should I send with an equipment enquiry?
Send the material or workpiece details, required kg/batch or kg/h, temperature limits, process target, available utilities and installation space. Trial results and the agreed technical proposal define the supplied configuration.
Compare related equipment
Full equipment directoryOzone Equipment & Systems
CZM
FLUIVEX Double-Cone Blender with Ozone Treatment
A tumbling double-cone vessel brings powders or granules into contact with ozone during a batch treatment cycle.
Model: CZM-200; Vessel volume (L): 200; Loading volume (L): 100; Ozone output (g/h): 5; Machine power (kW): 0.75Ozone Equipment & Systems
XYM
FLUIVEX Ozone Treatment and Low-Temperature Drying Cabinet
A cabinet with separate ozone-treatment and electric-drying modes. The brochure explicitly states that the two modes must not run together.
Model: XYM-1000; Machine power (kW): 5.5; Drying temperature (°C): 40–150; Chamber L × W × H (mm): 960 × 750 × 1400Ozone Equipment & Systems
O₃ SYSTEM
FLUIVEX Integrated Ozone Generation System
An engineered package combines feed-gas preparation, ozone generation, dosing, monitoring, cooling and off-gas treatment.
LET’S BUILD SOMETHING BETTER
Equipment starts with your process.
Share your material, required output and process conditions to discuss a suitable configuration.