Material or workpiece
Composition, form, bulk density or dimensions; moisture, viscosity and any special media.
Ozone Equipment & Systems
XYM / RUNHAO
Ozone Treatment and Low-Temperature Drying Cabinet
A cabinet with separate ozone-treatment and electric-drying modes. The brochure explicitly states that the two modes must not run together.
- Ozone treatment and low-temperature drying
- Electric heat and programmed controls
- Separate operating modes that must not run together
Brochure equipment photograph. Appearance and configuration vary by model.
01 / APPLICATION
What this equipment does
Ozone treatment followed by low-temperature drying of suitable materials or articles. The two operating modes must not be used simultaneously.
A cabinet with separate ozone-treatment and electric-drying modes. The brochure explicitly states that the two modes must not run together.
02 / TECHNICAL DATA
Reference specifications
Source: company brochure, PDF page 17 right lower. Reviewed 5 November 2026.
- Operating modes
- Ozone treatment and drying must not operate simultaneously
On smaller screens, scroll the table sideways.
| Model | Machine power (kW) | Drying temperature (°C) | Chamber L × W × H (mm) |
|---|---|---|---|
| XYM-1000 | 5.5 | 40–150 | 960 × 750 × 1400 |
| XYM-1600 | 7 | 40–150 | 1200 × 950 × 1400 |
| XYM-2200 | 8.5 | 40–150 | 1400 × 1100 × 1400 |
03 / PROJECT INPUTS
Define the application before choosing a size
Process and capacity
Required kg/batch or kg/h, acceptable temperature, processing time and quality endpoint.
Installation and validation
Available utilities, loading access, cleaning, controls and the agreed acceptance method.
Questions about this equipment
What is the Ozone Treatment and Low-Temperature Drying Cabinet used for?
Ozone treatment followed by low-temperature drying of suitable materials or articles. The two operating modes must not be used simultaneously.
Which specifications are available for the XYM range?
The table on this page lists the brochure configurations and their units. The source is the company brochure, PDF page 17 right lower. Confirm the current model, utilities and acceptance conditions before ordering.
What should I send with an equipment enquiry?
Send the material or workpiece details, required kg/batch or kg/h, temperature limits, process target, available utilities and installation space. Trial results and the agreed technical proposal define the supplied configuration.
Compare related equipment
Full equipment directoryOzone Equipment & Systems
CZM
Double-Cone Blender with Ozone Treatment
A tumbling double-cone vessel brings powders or granules into contact with ozone during a batch treatment cycle.
Model: CZM-200; Vessel volume (L): 200; Loading volume (L): 100; Ozone output (g/h): 5; Machine power (kW): 0.75Ozone Equipment & Systems
O₃ SYSTEM
Integrated Ozone Generation System
An engineered package combines feed-gas preparation, ozone generation, dosing, monitoring, cooling and off-gas treatment.
Ozone Equipment & Systems
RUNHAO / OZONE TECHNOLOGYRH-D-F/YSPECIFICATION REFERENCE
RH-D-F/Y
Large Oxygen-Fed Ozone Generator
A large ozone-generator range using oxygen feed gas. The listed output sizes span 0.5–30 kg/h under conditions to be agreed.
Model: RH-D-F/Y500; Ozone output (kg/h): 0.5; Gas flow (Nm³/h): 4–5; Overall dimensions (mm): 1200 × 600 × 1600LET’S BUILD SOMETHING BETTER
Equipment starts with your process.
Share your material, required output and process conditions to discuss a suitable configuration.